Palo Alto Networks · PA-400R ruggedized series
Palo Alto Networks PA-410R
The Palo Alto Networks PA-410R is a ruggedized firewall that runs PAN-OS. Palo Alto Networks publishes a firewall throughput of 1.4 Gbps and a threat prevention throughput of 650 Mbps for it.
- Firewall throughput
- 1.4 Gbps
- Threat protection
- 650 Mbps
- IPsec VPN
- 650 Mbps
- Form
- Rugged
Who it suits
It is built for industrial sites, substations, vehicles and outdoor cabinets, where heat, dust or vibration would be too much for an office unit. With protection switched on, plan for an internet line of no more than about two-thirds of the threat prevention throughput figure. For the PA-410R that means a line of up to about 400 Mbps.
Palo Alto Networks PA-410R specifications
| Performance | |
|---|---|
| Firewall throughput | 1.4 Gbps |
| Threat Prevention throughput | 650 Mbps |
| IPsec VPN throughput | 650 Mbps |
| Maximum concurrent sessions | 64,000 |
| New sessions per second | 11,400 |
| Hardware | |
| Form factor | Ruggedized |
Specifications from Palo Alto Networks's published data, checked October 2026. See Palo Alto Networks's firewall pages. Throughput figures are each manufacturer's own published numbers. Manufacturers test in different ways, so compare across brands with care. Confirm details before ordering.
What we do with it
- Supply
Firewall supply and installation
The right-sized firewall from any of the five brands, with its licence, installed and configured at your site.
- Audit
Firewall configuration and audit
A review of your rules, firmware, admin access and VPNs, with the weak points fixed and written down.
- Renewal
Firewall licence renewal
Renewals for FortiGuard, Sophos, Palo Alto Networks, SonicWall and Juniper subscriptions, quoted from your serial number.
- Migrate
Firewall migration
Move from an old firewall to a new one, same brand or another, with the rules and VPNs carried over.
Questions about the PA-410R
What internet speed can the PA-410R handle?
Palo Alto Networks publishes a threat prevention throughput of 650 Mbps for the PA-410R. Leaving headroom for busy hours, that suits an internet line of up to about 400 Mbps with protection switched on. With inspection off, its firewall throughput is 1.4 Gbps.
How many connections can the PA-410R handle?
Palo Alto Networks lists a maximum of 64,000 concurrent sessions and 11,400 new sessions per second.
Does the PA-410R need a licence?
The hardware works as a basic firewall on its own. Protection features such as intrusion prevention, web filtering and anti-malware need an active Palo Alto Networks subscription, and so do firmware updates and support. We quote the firewall with the licence term you choose.
Do you supply the PA-410R with installation?
Yes. We supply it with its licence registered, install and configure it at your site, and hand over the logins and documentation. Ask for a quote on this page.
Similar Palo Alto Networks models
- Rugged
Palo Alto Networks PA-410R-5G
Firewall 1.4 Gbps, threat protection 650 Mbps
- Rugged
Palo Alto Networks PA-52R-5G
Firewall 2.0 Gbps, threat protection 1.0 Gbps
- Rugged
Palo Alto Networks PA-54R-POE
Firewall 3.0 Gbps, threat protection 1.6 Gbps
- Rugged
Palo Alto Networks PA-54R-POE-D-5G
Firewall 3.0 Gbps, threat protection 1.6 Gbps
Closest models from other brands
Throughput figures are each manufacturer's own published numbers. Manufacturers test in different ways, so compare across brands with care.
- Desktop
Fortinet FortiGate 60F
Firewall 10 / 10 / 6 Gbps, threat protection 700 Mbps
- Desktop
Sophos XGS 88
Firewall 9.9 Gbps, threat protection 2 Gbps
- Desktop
SonicWall TZ270
Firewall 2 Gbps, threat protection 750 Mbps
- Rackmount
Juniper SRX345
Firewall 5 Gbps, threat protection 600 Mbps (IPS)